Error code e002-0000, e002-0001, e002-0010

Error Code e000002-0000
There is an abnormal rise in temperature. After correcting the fault, besure to reset the error.
(COPIER>FUNCTION>CLEAR>ERR)

Descriptions :
The reading of the main thermistor is not 100 deg C 12 sec after it has exceeded 70 deg C.

Remedy :
- Check the connector of the main/shutter thermistor for any fault in connection and wiring.
- Check the main/shutter thermistor for mounting condition.
- Replace the main/shutter thermistor.
- Replace the fixing heater unit.
- Replace the DC controller PCB.

Error Code e000002-0001
There is an abnormal rise in temperature. After correcting the fault, besure to reset the error.
(COPIER>FUNCTION>CLEAR>ERR)

Descriptions :
The reading of the main thermistor is not 150 deg C 15 after it has exceeded 100 deg C

Remedy :
- Check the connector of the main/shutter thermistor for any fault in connection and wiring.
- Check the main/shutter thermistor for mounting condition.
- Replace the main/shutter thermistor.
- Replace the fixing heater unit.
- Replace the DC controller PCB.

Error Code e000002-0010
There is an abnormal rise in temperature. After correcting the fault, besure to reset the error.
(COPIER>FUNCTION>CLEAR>ERR)

Descriptions :
The power has been turned off and then back on without resetting the error.

Remedy :
- Reset the error.
(COPIER>FUNCTION>CLEAR>ERR)