Error code e000-0000 and e000-0010

Error code e000000-0000
The heater fails to heat. After correcting the fault, besure to reset the error.
(COPIER>FUNCTION>CLEAR>ERR)

Descriptions : 
After power-on, the reading of the main thermistor does not increase to 70 deg C or higher within 20 sec.

Remedy : 
- Replace the main/shutter thermistor.

- Replace the DC controller PCB.



Error code e000000-0010
The heater fails to heat. After correcting the fault, besure to reset the error.
(COPIER>FUNCTION>CLEAR>ERR)

Descriptions : 

The power has been turned off and then on without resetting the error

Remedy : 

- Reset the error. 

(COPIER>FUNCTION>CLEAR>ERR)